High Quality SMS Meltblown Spunbonded PP Non-woven Fabric Making Equipment Production Lin

Short Description:

Maintenance and maintenance measures of non-woven equipment

1. Lubricating oil and engine oil should be added regularly to all oil filling points of the equipment. The timely replacement of lubricating oil and engine oil can effectively ensure the smooth operation of the machine and reduce the probability of failure.

2. The parts with tightness requirements should be checked in time every day. If there is a fault or problem, it should be repaired or replaced as soon as possible.

3. The chamber body guard plate of the non-woven equipment should be checked daily, and if it is damaged, it should be replaced in time.

4. The parts of the shot blaster guard plate, blades and impellers, directional sleeves, and blasting wheels must be inspected twice per shift. If any damage is found to the above parts, they must be replaced in time.

5. Electrical systems and transmissions need to be inspected twice a week to ensure the normal operation of the power system and prevent short circuits.

6. Regularly conduct clean and hygienic inspections, check the internal parts of the machine, and find foreign objects and pollution that should be cleaned up in time to avoid clogging in the machine body and affecting operation.

Product Detail

Product Tags

High Quality SMS Meltblown Spunbonded PP Non-woven Fabric Making Equipment Production Lin

Advantages of non-woven equipment

1. The entire process flow of non-woven equipment can be fully automated, and only 1~2 people are required to operate, which can save limited labor.

2. The non-woven fabric equipment can adjust the production speed and product size within the range. The non-woven fabric equipment uses touch screen operation, equipped with stepping fixed length, photoelectric tracking, automatic counting and automatic punching, etc.

3. In order to further realize the energy-saving effect of non-woven equipment, the non-woven equipment has the function of recycling surplus materials during the production process of the non-woven equipment, which automatically collects the remaining waste during the production process, which is helpful for secondary utilization and reduces labor intensity. Increased work efficiency. The recovery of waste materials not only saves resources, but also has a good protective effect on the environment.

Non-woven equipment

Non-woven production line10 Non-woven production line7 Non-woven production line8 Non-woven production line9

Non-woven equipment specifications

S 1600MM 8-200 1500T Diamond, oval, cross and line
S 2400MM 8-200 2400T Diamond, oval, cross and line
S 3200MM 8-200 3000T Diamond, oval, cross and line
SS 1600MM 10-200 2500T Diamond, oval, cross and line
SS 2400MM 10-200 3300T Diamond, oval, cross and line
SS 3200MM 10-200 5000T Diamond, oval, cross and line
SMS 1600MM 15-200 2750T Diamond and oval
SMS 2400MM 15-200 3630T Diamond and oval
SMS 3200MM 15-200 5500T Diamond and oval

Non-woven equipment delivery packaging

Non-woven production line30 Non-woven production line33

纺粘无纺布设备-喷丝头 纺粘无纺布设备-绕卷机

Operation and maintenance requirements of spunbond nonwoven production line

(1) There are many important parts on the spunbond non-woven production line, these parts need to be placed in place after use, and the instrument needs to be zeroed. The spunbond non-woven fabric production line should not be stacked with flammable and explosive materials, and no extraneous debris should be placed on the spunbond non-woven fabric production line. The countertop should be kept clean, and some oil and rust stains should be wiped clean.

(2) The internal mechanical parts of the spunbond non-woven production line are not as good as bearings, gears, etc., which need to be carefully checked during the operation and maintenance process, and to ensure that these parts can operate normally. For some parts that are relatively easy to wear and have failed, they must be mechanically replaced in time. The motors, gear boxes, synchronizing wheels, etc. of the spunbond non-woven fabric production line must be thoroughly maintained, and the circuits and mechanical mechanisms inside must be cleaned and adjusted.

(3) The spunbond non-woven production line sometimes has a lot of faults. Some faults, such as abnormal noises, track jams, etc., can be eliminated by manual operation. For some parts with frequent internal transmission, some lubricating oil can be added to ensure the smooth operation of machinery and equipment.

  • Previous:
  • Next:

  • Write your message here and send it to us